Call us now +64 9 948 4762
Write a review about product you just purchased and receive 5% discount for your next order
Our dispatch time is only 1 working days from date of purchase
FREE with any GSM product purchased today (only for New Zealand customers)
JA-150M Wireless magnetic detector and universal transmitter with 2 inputs

JA-150M Wireless magnetic detector and universal transmitter with 2 inputs

  • Brand: Jablotron
  • Product Code: JA-150M
  • Availability: Only Trade Customers
The JA-150M is a wireless component of the JABLOTRON 100 system
  - OR -  

Power1x alkaline battery AA (LR6)1.5V 2400mAh
Typical battery lifetimeabout 2 years
Communication band868.1 MHz, JABLOTRON protocol
RF rangeapprox. 300m (open area)
The maximum length of cable for external detectors3 m
Dimensions 109 x 24 x 22 mm
ClassificationGrade 2
According toEN 50131-1, EN 50131-3, EN 50131-2-6, EN 50131-5-3
Operational environmentEN 50131-1 II. Indoor general
Operational temperature range-10 to +40 °C
Complies withETSI EN 300220, EN 50130-4, EN 55022, EN 50950-1
Can be operated according toERC REC 70-03

The JA-150M it is a magnetic wireless detector with two configurable independent inputs.

The detector is also designed to detect the handling of roller blinds.

The JA-150M inputs can be used with up to two LD-81 flood detector.

It occupies two positions in the control panel.

Description of inputs:
IN1 – Input terminal for connection to detector no. 1
IN2 – Input terminal for connection to detector no. 2
(Norm/Puls/Rol1/Rol2 can be set for IN1, IN2)
TMP – Input terminal for external tamper contact connection
COM – Common terminal for inputs IN1, IN2 and TMP
MG – Internal magnetic detector

Description of input modes:
Norm – status mode, the detector signals activation and deactivation of the input terminals
Pulse – pulse mode, the detector just signals activation (whether turning off or turning on depends on the default NO/NC standby mode).
Off – input disabled
Rol1, Rol2 – roller mode, which reacts to repeated pulses and short activating (NO) pulses with a sensitivity select-able in to two levels:Rol1 =
activation after 3 pulses within a 2 minute period; Rol2 = activation after 5 pulses within a 2 minute period. When this loop is disconnected longer then 0.5s, a
tamper alarm is triggered. After input triggering in Rol4/Rol2 mode the detector does n´t react to the next activation for 10 sec.
LD-81 – mode for connecting LD-81 flood detectors

Write a review

Please login or register to review