DIN 3G controller 8-30 AC-DC
- Brand::Pacific GSM
- Product Code: DIN-3G-DC
- Availability: Out Of Stock
| Power supply | 8-30V AC/DC |
|---|---|
| Power consumption | approx 20 mA, relays on 150mA, battery charging 300mA max. 1500mA |
| Frequency bands | UMTS 800/ 850/ 900/ 1900/ 2100MHz GSM/EDGE 850/ 900/ 1800/ 1900 MHz |
| Max. load capacity of the RELAY power contacts | 250 V AC / 5 A |
| Output switching time in impulse mode | adjustable from 1s to 24 h with an increment of 1 s |
| IN1, IN2 inputs | activated by GND connection |
| Input for temperature sensor | max. connection length 5 m, measurement range -20 °C to 125 °C |
| Back up battery | Li-ion 3.7V/550mAh |
| Typical backup time | 3 hours |
| Operating temperature range | -20 to +50 °C |
| Ingress protection class | IP20 |
| Dimensions (without the antenna) | 90 x 68 x 58 mm, 2 DIN modules |
| In conformity with | EN 60950-1, A11, A1,A12, A2,EN62311, EN 55032, EN 61000-6-2, 4-2,4-3,4-4,4-5,4-6,4-11, EN 301 511, EN 301 489-7, AS/NZS 60950.1:2011 incl. Amdt. 1, AS/NZS 2772.2, FCC |
https://www.pacificgsm.com/4G-IoT-controller-230V-LTE-communicator-relay-switch-with-battery-back-up
3G Global coverage IoT controller and communicator based on popular GSM-DIN3 with Power supply: 8-30V AC/DC with internal battery back up
Frequency: UMTS 800/ 850/ 900/ 1900/ 2100MHz
GSM/EDGE 850/ 900/ 1800/ 1900 MHz
The 3G controller operate in New Zealand on Spark, Vodafone, 2Degrees, Skinny Mobile and Warehouse Mobile networks
The 3G controller operate in Australia on Telstra, Optus and Vodafone network
The 3G controller operate in USA on AT&T, T-Mobile
Through DIN-3G communicator can be remotely controlled any electrical circuit such as lighting, pumps, gates, machinery
May quickly indicate and reports faults, loss of liquid in tanks, emergency conditions, reboot servers or simply using a suitable security sensor to watch objects.
Remote temperature monitoring anywhere with thermostat function
Remote control from a mobile phone.
Remote maintenance, warnings, alarms.
Irrigation systems.
Remote system monitoring.
Plant maintenance.
Security systems
Alert, panic dialler
All easily through standard mobile phone
Setup is very simple – just store phone numbers to which is to be sent and which authorized to communicate with the communicator.
Furthermore, the protocol allows you to edit text (commands), to maximum adaptation to your application. The programming can be done via USB-PC software or SMS commands.
DIN-3G is equipped with two universal inputs, which can connect any contact sensors. After changing the status of the input DIN-3G will be sending an TXT with the name of entry (eg, Failure, Fire, Outage, Water, Server, etc.) and can optionally be made calls to six phone numbers. Each input is separately configurable.
DIN-3G is equipped by two high power relay 230V/5A. You can switch then remotely via TXT or simply by call to change their status.
The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).
