Telstra Australia Network DIN controller
- Brand::Pacific GSM
- Product Code: DIN-3G
- Availability: Out Of Stock
| Power supply | 100 - 240 V AC / 50/60 Hz, device of protective class II. or 8-30V AC/DC |
|---|---|
| Power consumption | approx 20 mA, relays on 150mA, battery charging 300mA max. 1500mA |
| Frequency bands | UMTS 800/ 850/ 900/ 1900/ 2100MHz GSM/EDGE 850/ 900/ 1800/ 1900 MHz |
| Max. load capacity of the RELAY power contacts | 250 V AC / 5 A |
| Output switching time in impulse mode | adjustable from 1s to 24 h with an increment of 1 s |
| IN1, IN2 inputs | activated by GND connection |
| Input for temperature sensor | max. connection length 5 m, measurement range -20 °C to 125 °C |
| Back up battery | Li-ion 3.7V/550mAh |
| Typical backup time | 3 hours |
| Operating temperature range | -20 to +50 °C |
| Ingress protection class | IP20 |
| Dimensions (without the antenna) | 90 x 68 x 58 mm, 2 DIN modules |
| In conformity with | EN 60950-1, A11, A1,A12, A2,EN62311, EN 55032, EN 61000-6-2, 4-2,4-3,4-4,4-5,4-6,4-11, EN 301 511, EN 301 489-7, AS/NZS 60950.1:2011 incl. Amdt. 1, AS/NZS 2772.2, FCC |
https://www.pacificgsm.com/4G-IoT-controller-230V-LTE-communicator-relay-switch-with-battery-back-up
Our popular DIN IoT controller and communicator now available for Telstra Network Australia with Power supply: 100-230VAC or 5-30V AC/DC
DIN-3G switch can remotely control any electrical circuit such as switches, heaters, pumps and gates
DIN-3G communicator can reports faults from machinery, liquid levels, power outage or reboot servers
DIN-3G controller can monitor temperature limits via connected temperature probe or can work as a thermostat
DIN-3G can work as a alarm system with connected PIR sensors and siren
Telstra network compatible SIM card link click Here
Setup is very simple via PC-USB software
DIN-3G has two universal inputs, which react to connection or disconnection from GND
If the inputs change status DIN-3G will send an text or call to programmed numbers
DIN-3G inputs is separately configurable.
DIN-3G has two high power relay output which can be switched remotely via TXT or simply by call to change their status.
The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).
