AT&T T-Mobile USA 4G LTE Network controller
- Brand::Pacific GSM
- Product Code: PGM2-4G
- Availability: In Stock
| Power supply | 5V DC- 15V DC | |
|---|---|---|
| Power consumption | approx 20 mA 12V , max. 1000mA 12V | |
| Frequency bands | LTE (4G) B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28/B66 | |
| Input 1-2 | activated by GND connection or disconnection | |
| Output 1-2 | transistor open collector with load max 100 mA 12V | |
| Output switching time in impulse mode | adjustable from 1s to 24 h with an increment of 1 s | |
| Expander | Expander for additional modules inputs, outputs, relays, LCD etc. | |
| Input for temperature sensor | max. connection length 5 m, measurement range -55 °C to 125 °C | |
| Operating temperature range | -20 to +50 °C | |
| Ingress protection class | IP20 | |
| Dimensions (without the antenna) | 93 x 61 x 20 mm | |
Our popular PGM2-4G IoT LTE controller and communicator now available for AT&T and T-Mobile network USA
Through PGM2-4G communicator can be remotely controlled any electrical circuit such as lighting, pumps, gates, machinery
May quickly indicate and reports faults, loss of liquid in tanks, emergency conditions, reboot servers or simply using a suitable security sensor to watch objects.
Remote temperature monitoring anywhere with thermostat function
AT&T network compatible SIM card link click Here
Remote control from a mobile phone
Remote maintenance, warnings, alarms
Irrigation systems
Remote system monitoring
Plant maintenance
Security systems
Alert, panic dialler
All easily through standard mobile phone
Setup is very simple – just store phone numbers to which is to be sent and which authorized to communicate with the communicator.
Furthermore, the protocol allows you to edit text (commands), to maximum adaptation to your application. The programming can be done via USB-PC software or SMS commands.
PGM2-4G is equipped with two universal inputs, which can connect any contact sensors. After changing the status of the input PGM2-4G will be sending an TXT with the name of entry (eg, Failure, Fire, Outage, Water, Server, etc.) and can optionally be made calls to ten phone numbers. Each input is separately configurable.
PGM2-4G is equipped by two outputs. You can switch then remotely via TXT or simply by call to change their status.
The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).
