JB-111N Bus signal output relay module PG
- Brand::Jablotron
- Product Code: JB-111N
- Availability: In Stock
| Power | bus 12V (9 ... 15V) |
|---|---|
| Current consumption during backup (relay open / closed) | 5 mA / 25 mA |
| Current consumption for choice of cable | 25 mA |
| Relay contact: | 10 mA |
| Maximum switching voltage | 50 V AC / 60V DC |
| Maximum switching current | max.2 |
| Minimum switching current | |
| Dimensions | 70 x 38 x 15 mm |
| Classification | grade 2 according to EN 50131-1, EN 50131-3 |
| Environment | EN 50131-1. general indoor |
| Operating temperature range | -10 to +40 ° C |
| Complies with | EN 50130-4, EN 55022 |
The JB-111N signal output relay module PG have a switching relay (2 A/60V DC) with NO or NC terminals. It can be used for switching garage doors, gates etc.
The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 128), the programming mode option is ON/OFF, impulse with timer up to 24 hour, copy of any detector or internal status, delayed copy, extend copy or change. The setting of individual modes is done in the
PG outputs window in the F-Link program.
The relay module communicates via the digital bus and can be installed in JA-190PL multipurpose boxes .
The module is non-addressable (no position in the alarm system).
Related Products
