Micro 3G Controller
- Brand::Pacific GSM
- Product Code: PGM1-3G
- Availability: Out Of Stock
| Power supply | 5V DC- 15V DC | |
|---|---|---|
| Power consumption | approx 20 mA, max. 1500mA | |
| Frequency bands | UMTS 800/ 850/ 900/ 1900/ 2100MHz GSM/EDGE 850/ 900/ 1800/ 1900 MHz | |
| Input | activated by GND connection | |
| Output | transistor open collector with load max 100 mA 12V | |
| Output switching time in impulse mode | adjustable from 1s to 24 h with an increment of 1 s | |
| UART | interface voltage level 3V3 and 5V0 | |
| Input for temperature sensor | max. connection length 5 m, measurement range -20 °C to 125 °C | |
| Operating temperature range | -20 to +50 °C | |
| Ingress protection class | IP20 | |
| Dimensions (without the antenna) | 75 x 38 x 27 mm | |
| In conformity with | EN 60950-1, A11, A1,A12, A2,EN62311, EN 55032, EN 55024EN 61000-4-2,4-3,4-4,4-5,4-6, EN 301 511, EN 301 489-7, AS/NZS 60950.1:2011 incl. Amdt. 1, AS/NZS 2772.2, FCC |
Discontinued. Replacement PGM2-4G
The popular PGM1 Communicator in 3G version is here
The PGM1-3G Module / Controller is a multi function miniature communication device for wide range of IoT applications.
This version of PGM1-3G is supplied in enclosure with wiring for quick installation.
Through PGM1-3G module can be remotely controlled device such us PLC, garage door, controllers
May indicate a malfunction Alarms or loss of liquid in tanks, emergency conditions, or simply using a suitable sensor to watch object or temperature limits with thermostat function.
All easily through standard mobile phone.
PGM1-3G module is a fully pre-programmed, for most common function ( alarm report ), you just call the unit SIM number from phone which you want to contact if a PGM1-3G input connected to GND, PGM1-3G will send you confirmation SMS with saved number and that is all. If the PGM1-3G input will connect to a GND the stored number will receive SMS "Alarm Activated". If you need custom setting we can pre-program for you before shipping or can be done simple via SMS command.