Telstra Australia Network DIN controller
- Brand: Pacific GSM
- Product Code: DIN-3G
- Availability: In Stock
|Power supply||100 - 240 V AC / 50/60 Hz, device of protective class II. or 8-30V AC/DC|
|Power consumption||approx 20 mA, relays on 150mA, battery charging 300mA max. 1500mA|
UMTS 800/ 850/ 900/ 1900/ 2100MHz
GSM/EDGE 850/ 900/ 1800/ 1900 MHz
|Max. load capacity of the RELAY power contacts||250 V AC / 5 A|
|Output switching time in impulse mode||adjustable from 1s to 24 h with an increment of 1 s|
|IN1, IN2 inputs||activated by GND connection|
|Input for temperature sensor||max. connection length 5 m, measurement range -20 °C to 125 °C|
|Back up battery||Li-ion 3.7V/550mAh|
|Typical backup time||3 hours|
|Operating temperature range||-20 to +50 °C|
|Ingress protection class||IP20|
|Dimensions (without the antenna)||90 x 68 x 58 mm, 2 DIN modules|
|In conformity with||EN 60950-1, A11, A1,A12, A2,EN62311, EN 55032, EN 61000-6-2, 4-2,4-3,4-4,4-5,4-6,4-11, EN 301 511, EN 301 489-7, AS/NZS 60950.1:2011 incl. Amdt. 1, AS/NZS 2772.2, FCC|
Our popular DIN IoT controller and communicator now available for Telstra Network Australia with Power supply: 100-230VAC or 5-30V AC/DC
Through DIN-3G communicator can be remotely controlled any electrical circuit such as lighting, pumps, gates, machinery
May quickly indicate and reports faults, loss of liquid in tanks, emergency conditions, reboot servers or simply using a suitable security sensor to watch objects.
Remote temperature monitoring anywhere with thermostat function
Telstra network compatible SIM card link click Here
Remote control from a mobile phone
Remote maintenance, warnings, alarms
Remote system monitoring
Alert, panic dialler
All easily through standard mobile phone
Setup is very simple – just store phone numbers to which is to be sent and which authorized to communicate with the communicator.
Furthermore, the protocol allows you to edit text (commands), to maximum adaptation to your application. The programming can be done via USB-PC software or SMS commands.
DIN-3G is equipped with two universal inputs, which can connect any contact sensors. After changing the status of the input DIN-3G will be sending an TXT with the name of entry (eg, Failure, Fire, Outage, Water, Server, etc.) and can optionally be made calls to six phone numbers. Each input is separately configurable.
DIN-3G is equipped by two high power relay 230V/5A. You can switch then remotely via TXT or simply by call to change their status.
The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).