Call us now +64 9 948 4762
 
DISCOUNT 5% WITH NEXT PURCHASE
Write a review about product you just purchased and receive 5% discount for your next order
 
DELIVERY SCHEDULE
Our dispatch time is only 1 working days from date of purchase
 

JA-152P-AN Wireless PIR motion detector anthracite

JA-152P-AN Wireless PIR motion detector anthracite

  • Brand::Jablotron
  • Product Code: JA-152P-AN
  • Availability: In Stock


Compatible withF-Link 2.0.0 and higher
Power1 Lithium battery type CR123A (3 V/1500 mAh)
Please note: Battery not included
Typical battery lifetime4 years (the longest in smartwatch mode, at 20 °C)
Low battery voltage< 2.4 V
Current consumption in standby mode30 µA
Maximum current consumption100 mA
Communication band868.1 MHz, JABLOTRON protocol
Communication rangeapprox. 300 m (open area)
Recommended installation height2.2 – 2.5 m above the floor
Detection angle/detection coverage90°/12 m
Dimensions62 x 110 x 40 mm
Weight (without battery)90 g
ClassificationSecurity grade 2/Environmental class II (according to EN 50131-1)
Operational environmentIndoor general
Operational temperature range-10 °C to +40 °C
Average operational humidity75 % RH, non-condensing
Certification bodyTrezor Test s.r.o. (no. 3025)
Complies withEN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581
Can be operated according toERC REC 70-30

JA-152P-AN Wireless PIR motion detector white is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90 °/12 m.


The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.


Besides standard positioning in a corner of a room it can be installed on a wall surface using a JA-196PL-S bracket where the detector is partly recessed and elegantly blends with the wall. For special applications such as e.g. ceiling mounting or an inclined detection angle the JA-191PL articulated holder can be used.

The detector has impulse activation.

The detector can be used to control programmable PG outputs.

The resistance to false alarms is adjustable at two levels

The detector provides standard resistance to white light at the level prescribed by the standard (up to 6000 lux).

The detector is addressable and it occupies one position in the system

Write a review
Please login or register to review