Call us now +64 9 948 4762
 
DISCOUNT 5% WITH NEXT PURCHASE
Write a review about product you just purchased and receive 5% discount for your next order
 
DELIVERY SCHEDULE
Our dispatch time is only 1 working days from date of purchase
 
FREE with any GSM product purchased today (only for New Zealand customers)
Telstra Australia Network DIN controller

Telstra Australia Network DIN controller

  • Brand: Pacific GSM
  • Product Code: DIN-3G
  • Availability: In Stock

Available Options

  - OR -  




Power supply100 - 240 V AC / 50/60 Hz, device of protective class II. or 8-30V AC/DC
Power consumptionapprox 20 mA, relays on 150mA, battery charging 300mA max. 1500mA
Frequency bands

UMTS          800/ 850/ 900/ 1900/ 2100MHz

GSM/EDGE 850/ 900/ 1800/ 1900 MHz

Max. load capacity of the  RELAY power contacts250 V AC / 5 A
Output switching time in impulse modeadjustable from 1s to 24 h with an increment of 1 s
IN1, IN2 inputsactivated by GND connection
Input for temperature sensormax. connection length 5 m, measurement range -20 °C to 125 °C
Back up battery
Li-ion 3.7V/550mAh
Typical backup time3 hours
Operating temperature range-20 to +50 °C
Ingress protection classIP20
Dimensions (without the antenna)90 x 68 x 58 mm, 2 DIN modules
In conformity withEN 60950-1, A11, A1,A12, A2,EN62311, EN 55032, EN 61000-6-2, 4-2,4-3,4-4,4-5,4-6,4-11, EN 301 511, EN 301 489-7, AS/NZS 60950.1:2011 incl. Amdt. 1, AS/NZS 2772.2, FCC

Our popular DIN IoT controller and communicator now available for Telstra Network Australia with Power supply: 100-230VAC or 5-30V AC/DC


DIN-3G switch can remotely control any electrical circuit such as switches, heaters, pumps and gates

DIN-3G communicator can reports faults from machinery, liquid levels, power outage or reboot servers

DIN-3G controller can monitor temperature limits via connected temperature probe or can work as a thermostat

DIN-3G can work as a alarm system with connected PIR sensors and siren



 Telstra network compatible SIM card link click Here
 


Setup is very simple  via PC-USB software


DIN-3G has two universal inputs, which react to connection or disconnection from GND 

If the inputs change status DIN-3G will send an text or call to programmed numbers 

DIN-3G inputs is separately configurable.

DIN-3G has two high power relay output which can be switched remotely via TXT or simply by call to change their status.

The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).


Write a review

Please login or register to review