Call us now +64 9 948 4762
Write a review about product you just purchased and receive 5% discount for your next order
Our dispatch time is only 1 working days from date of purchase
FREE with any GSM product purchased today (only for New Zealand customers)
AT&T USA Network DIN controller

AT&T USA Network DIN controller

  • Brand::Pacific GSM
  • Product Code: DIN-3G
  • Availability: In Stock

Available Options

Power supply100 - 240 V AC / 50/60 Hz, device of protective class II. or 8-30V AC/DC
Power consumptionapprox 20 mA, relays on 150mA, battery charging 300mA max. 1500mA
Frequency bands

UMTS          800/ 850/ 900/ 1900/ 2100MHz

GSM/EDGE 850/ 900/ 1800/ 1900 MHz

Max. load capacity of the  RELAY power contacts250 V AC / 5 A
Output switching time in impulse modeadjustable from 1s to 24 h with an increment of 1 s
IN1, IN2 inputsactivated by GND connection
Input for temperature sensormax. connection length 5 m, measurement range -20 °C to 125 °C
Back up battery
Li-ion 3.7V/550mAh
Typical backup time3 hours
Operating temperature range-20 to +50 °C
Ingress protection classIP20
Dimensions (without the antenna)90 x 68 x 58 mm, 2 DIN modules
In conformity withEN 60950-1, A11, A1,A12, A2,EN62311, EN 55032, EN 61000-6-2, 4-2,4-3,4-4,4-5,4-6,4-11, EN 301 511, EN 301 489-7, AS/NZS 60950.1:2011 incl. Amdt. 1, AS/NZS 2772.2, FCC

Our popular DIN IoT controller and communicator now available for AT&T network USA with Power supply: 100-250V AC or 5-30V AC/DC

Through DIN-3G communicator can be remotely controlled any electrical circuit such as lighting, pumps, gates, machinery

May quickly indicate and reports faults, loss of liquid in tanks, emergency conditions, reboot servers or simply using a suitable security sensor to watch objects.

Remote temperature monitoring anywhere with thermostat function

 AT&T network compatible SIM card link click Here

    Remote control from a mobile phone
    Remote maintenance, warnings, alarms
    Irrigation systems
    Remote system monitoring
    Plant maintenance
    Security systems
    Alert, panic dialler


All easily through standard mobile phone

Setup is very simple – just store phone numbers to which is to be sent and which authorized to communicate with the communicator.

Furthermore, the protocol allows you to edit text (commands), to maximum adaptation to your application. The programming  can be done via USB-PC software or SMS commands.

DIN-3G is equipped with two universal inputs, which can connect any contact sensors. After changing the status of the input DIN-3G will be sending an TXT with the name of entry (eg, Failure, Fire, Outage, Water, Server, etc.) and can optionally be made calls to six phone numbers. Each input is separately configurable.

DIN-3G is equipped by two high power relay 230V/5A. You can switch then remotely via TXT or simply by call to change their status.

The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).

Write a review

Please login or register to review


Please subscribe to our newsletter by filling in the following fields.

* E-Mail:

First Name:

Last Name: