GSM Communicator GSM-DIN3 230V 2 relays 5A
- Brand: Pacific GSM
- Product Code: GSM-DIN3 Cell Phone Controller
- Availability: In Stock
|Power supply||100 - 240 V AC / 50/60 Hz, device of protective class II.|
|Power consumption||>approx 10 mA, relays on 100mA, battery charging 300mA max. 500mA|
|Frequency bands||850 / 900 / 1800 / 1900 MHz (GSM/GPRS)|
|Max. load capacity of the 2 RELAY power contacts||250 V AC / 5 A|
|Max. load capacity of the REL2 signal output||24 V DC / 100 mA|
|Output switching time in impulse mode||adjustable from 1s to 24 h with an increment of 1 s|
|IN1, IN2 inputs||activated by GND connection|
|Input for temperature sensor||max. connection length 5 m, measurement range -20 °C to 125 °C|
|Back up battery||Li-ion 3.7V/550mAh|
|Typical backup time||3 hours|
|Operating temperature range||-20 to +50 °C|
|Ingress protection class||IP20|
|Dimensions (without the antenna)||90 x 36 x 58 mm, 2 DIN modules|
|In conformity with||EN 60950-1, EN 55022, EN 61000-6-3, 6-2, 3-2,3-3, 4-2,4-3,4-4,4-5,4-6,4-11, ETSI EN 301 511, ETSI EN 301 489-7, AS/NZS 60950.1:2011 incl. Amdt. 1|
GSM-DIN3 230V controller and communicator.
So any electrical circuit can be quickly and easily switched or monitored through GSM network via SMS commands.
Through GSM-DIN3 communicator can be remotely controlled such as lighting, pumps, garage doors and gates.
May quicly indicate and reports faults, loss of liquid in tanks, emergency conditions, reboot servers or simply using a suitable security sensor to watch objects.
- Remote control from a mobile phone.
- Remote maintenance, warnings, alarms.
- Irrigation systems.
- Remote system monitoring.
- Plant maintenance.
- Security systems
- Alert, panic dialler
All easily through standard mobile phone
Setup is very simple – just store phone numbers to which is to be sent and which authorized to communicate with the communicator.
Furthermore, the protocol allows you to edit text (commands), to maximum adaptation to your application. The programming can be done via USB-PC software or SMS commands.
DIN3 GSM is equipped with two universal inputs, which can connect any contact sensors. After changing the status of the input GSM DIN2 will be sending an TXT with the name of entry (eg, Failure, Fire, Outage, Water, Server, etc.) and can optionally be made calls to six phone numbers. Each input is separately configurable.
GSM DIN3 is equipped by two high power relay 230V/5A. You can switch then remotely via TXT or simply by call to change their status.
The development of equipment was the emphasis on simplicity of the basic settings (go the layman), user friendliness (device communicates with you easy to use TXT messages).
Summary of functions and the basic characteristics:
Internal Li-ion battery ensures the operation of the communicator if the failure of the mains voltage 230V
Monitoring mains voltage 230V – warning TXT messages are sent during the outage.
2 inputs for sensor or control panel connection with option to configure for GND connection, GND disconnection or changes in status. Option to use one input as a control input for activation/deactivation from peripheral devices.
Each input can be named separately.
Allocation of six telephone numbers for TXT or call alerts
Each input can be separately switched to 24. Loop, to be permanently active inputs (in the watch condition).
Two relays 230V/5A with multiple configuration options. Activation via TXT, call or triggering of inputs (with timer option). Custom naming facility control commands (e.g. ON HEATING, OFF HEATING ...)
GSM DIN3 a series of control mechanisms that contribute to high reliability. Status reporting of critical system parameters on demand or on pre set time and date
GSM DIN3 can be quickly and easily configured using a PC program and a USB adapter! ( include in package) The program lets you make all settings easily save and retrieving from the configuration file. PC software available under download tab.
System communicates with you via TXT messages intuitive, all the settings can be done via TXT messages, quickly and easily without having to be at the device and connect it on computer.
Possibility to connect a external digital temperature sensor (sold separately with 2 and 5 meters lonng lead) - 20°C to 125°C with thermostat function to allow you control air conditionig, heating or frost.