GD-02-DIN Universal GSM controller
- Brand: Jablotron
- Product Code: GD-02-DIN
- Availability: In Stock
|Power supply||~ 230 V / 50 Hz, device of protective class II.|
|Internal power consumption||0.5 W / max. 1.2 W|
|Working frequency bands||850 / 900 / 1800 / 1900 MHz (GSM/GPRS)|
|Max. load capacity of the REL1 power contacts||250 V AC / 16 A|
|Max. load capacity of the REL2 signal output||24 V DC / 100 mA|
|Output switching time in impulse mode||adjustable from 1s to 24 h with an increment of 1 s|
|IN1, IN2 inputs||activated by GND connection, max. voltage 24 V DC|
|TH input for a GD-02T temperature sensor||max. connection length 3 m, measurement range -30 °C to 125 °C|
|Auxiliary power supply output +5V||5 V DC / max. 100 mA, not backed up|
|Typical backup time||3 hours|
|Operating temperature range||-20 to +50 °C|
|Ingress protection class||IP20|
|Dimensions (without the antenna)||90 x 36 x 58 mm, 2 DIN modules|
|In conformity with||EN 60950-1, EN 55022, EN 61000-6-3, ETSI EN 301 511, ETSI EN 301 489-7|
The GD-02-DIN universal GSM communicator and controller allows you to remotely control and monitor the state of various appliances. Standard SMS or ringing can be used as control commands.
Two outputs (one power and one signal output), which may be of the state or impulse type, are available for control.
For state reporting the GD-02-DIN is equipped with two inputs responding to a GND connection. Activation and deactivation of an input may be reported by means of an SMS, ringing or a combination of both the options.
One of these inputs also provides an impulse counter function (it can be connected e.g. to an electricity meter, water meter, gas meter etc.). The status of impulses can be checked with the use of SMSes.
The device also has an input for connection of a GD-02T thermometer, which supports temperature monitoring and a thermostat function, incl. setting of the comfortable and economic temperatures.
Up to 10 authorized phone numbers can be saved in the device.
The GD-02-DIN contains a backup battery maintaining its function even in the case of a power supply failure.
The product is designed for DIN-rail installation.
The functions can be set using GD-Link 2.1.0 software and higher (the USB cable for computer connection is supplied).